Wie lange hält Seam Grip in ungeöffneter Tube?

Einklappen

Ankündigung

Einklappen
Keine Ankündigung bisher.
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

  • Taffinaff
    Fuchs
    • 03.01.2014
    • 1069
    • Privat

    • Meine Reisen

    Wie lange hält Seam Grip in ungeöffneter Tube?

    Der Hersteller schreibt "two years shelf life". Ich habe das Seamgrip in Minituben im Reparierkit fuer unterwegs und frage mich, ob ich es wirklich alle zwei Jahre neu kaufen soll. Gibt es da Erfahrungen?

    Taffi

  • Becks
    Freak

    Liebt das Forum
    • 11.10.2001
    • 19620
    • Privat

    • Meine Reisen

    #2
    10 Jahre mindestens. Habe erst solch eine alte Tube verarbeitet.
    After much research, consideration, and experimentation, I have decided that adulthood is nothing for me. Thank you for the opportunity.

    Kommentar


    • Freedom33333
      Dauerbesucher
      • 09.09.2017
      • 900
      • Privat

      • Meine Reisen

      #3
      Offtopic aber damit verwandt:
      Ich habe die Daten nicht mehr exakt im Kopf, meine mich aber zu erinnern, dass eine angebrochene Tube recht schnell vertrocknet. Musste die angebrochene jedenfalls wegwerfen vor Ablauf des Datums.
      Gibts da eigentlich erfahrungswerte, hält das die typischen 2-3 Wochen im Trekking-Urlaub einmal geöffnet am Anfang oder lieber mehrere kleine Tuben?

      Kommentar


      • Taffinaff
        Fuchs
        • 03.01.2014
        • 1069
        • Privat

        • Meine Reisen

        #4
        https://outdoor.mcnett.eu/seamgrip/

        How To Prevent Seam Grip, Aquasure and Freesole from Hardening in the Tube.

        Seam Grip, Freesole and Aquasure are moisture-cure adhesives. As soon as you pop the top on the tube and expose the adhesive to the moisture in the air, the countdown begins. Unfortunately, you are unable to stop the curing process, but you can slow it down by storing the adhesive in a dry environment like your freezer. We typically recommend storing as follows:

        Begin by advancing the contents to the tube neck to remove any air that may be trapped in the tube. Next wipe the tube threads clean to prevent the cap from sticking. Next, cap tightly. Next, place the adhesive in a plastic zip-lock bag. Next, store the adhesive in a dry environment like your freezer. When ready to use, run the tube under warm water for about a minute.

        While this will not stop the adhesive from curing, it will help slow things down.

        We give an un-opened tube of adhesive a two-year shelf life. The „batch-number“ will be crimped into the bottom of the tube. The adhesive is typically good for two years past the date of filling.

        Kommentar


        • Funner
          Fuchs
          • 02.02.2011
          • 2329
          • Privat

          • Meine Reisen

          #5
          Genau das hatte ich mal bei McNett angefragt. Die Antwort war: "10 Jahre altes Silnet funktioniert mit absoluter Sicherheit nicht mehr. Allerspätestens nach 4 Jahren härtet es überhaupt nicht mehr aus. Die Tube kann guten Gewissens im Hausmüll entsorgt werden. "

          Kommentar


          • Taffinaff
            Fuchs
            • 03.01.2014
            • 1069
            • Privat

            • Meine Reisen

            #6
            Mit Silnet ging mir das auch so, die Tube war vielleicht drei-vier Jahre alt, ich erinnere mich allerdings nicht, ob es vielleicht eine angebrochene Tube war, jedenfalls war da nur noch eine gummiarrtige Substanz drin. Aber hier ging es um Seamgrip.

            Taffi

            Kommentar


            • Taffinaff
              Fuchs
              • 03.01.2014
              • 1069
              • Privat

              • Meine Reisen

              #7
              Zitat von Becks Beitrag anzeigen
              10 Jahre mindestens. Habe erst solch eine alte Tube verarbeitet.
              Jetzt habe ichs auch ausprobiert. Ein Isomattenventil neu eingeklebt, das Seamgrip war bestimmt > 5 Jahre. Problem gelöst.

              Taffi

              Kommentar

              Lädt...
              X