Schon wieder was neues:
http://www.itplight.com/product_show.asp?id=215
•LED Type: Cree XP-E Q5
•Function: Low-Med-High
•Finish: HA Type Ⅲ
•Reflector: Orange Reflector
•Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
•Water and Dust Resistant to IP68
•Switch: Head Twisty Switch
• Mil-spec: MIL-STD-810F
•Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are
not recommended since it may cause the light becoming hot very quickly).
• Functions and Runtime
Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
• Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
• Size and Weight:
L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
Operation:
Battery installation:
Remove the light tail.
Insert the battery with the negative end toward the tail.
Operation:
Insert the battery and tighten the tail
Tighten the head clockwise to turn on the headlamp.
When the light is on, loosen (counter-clockwise) and tighten (clockwise) the head within 1 second will change the mode
from low, medium to high level.
When choose a specific mode, the headlamp with memorize it and next time the headlamp will enter into that specific
mode when turning on.
Loosen the head to turn off the headlamp.
http://www.itplight.com/product_show.asp?id=215
•LED Type: Cree XP-E Q5
•Function: Low-Med-High
•Finish: HA Type Ⅲ
•Reflector: Orange Reflector
•Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
•Water and Dust Resistant to IP68
•Switch: Head Twisty Switch
• Mil-spec: MIL-STD-810F
•Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are
not recommended since it may cause the light becoming hot very quickly).
• Functions and Runtime
Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
• Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
• Size and Weight:
L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
Operation:
Battery installation:
Remove the light tail.
Insert the battery with the negative end toward the tail.
Operation:
Insert the battery and tighten the tail
Tighten the head clockwise to turn on the headlamp.
When the light is on, loosen (counter-clockwise) and tighten (clockwise) the head within 1 second will change the mode
from low, medium to high level.
When choose a specific mode, the headlamp with memorize it and next time the headlamp will enter into that specific
mode when turning on.
Loosen the head to turn off the headlamp.
Kommentar